HEIDELBERG Suprasetter A52, Installation Manual

Page: 37 / 86

Installation
Suprasetter A52/A75 – Installation 35
Installation
Installation Suprasetter A52/A75
Delivery of the Suprasetter
The Suprasetter comes on a pallet. The pallet must be transported with a trolley or fork-lift truck, but
not with a crane.
Lifting the Suprasetter off the Pallet
Fig. 1 Instruction on the pallet
Remove the outer packaging of the Suprasetter. A
transparent envelope is attached to the top of the
Suprasetter with adhesive tape (Fig. 1/1). It con-
tains two instructions on how to lift the Supraset-
ter off the pallet: one for fork-lift trucks and one for
pallet trucks.
You must remove the Suprasetter from the pallet
in several steps with a pallet truck if no fork-lift
truck is available.
The blocks packed on the sides of the Suprasetter
are needed if a pallet truck is used (see Installa-
tion Instructions, image 16 and 17, see
page 34 ).
The spacers (image 9 thru 13) are located on the
left and right below the Suprasetter and must be
unscrewed before removing them from the pallet
and the Suprasetter.
NOTICE
Fork-lift truck
In the installation instructions enclosed with the Suprasetter, the three exclama-
tion points draw your attention to the fact that you must open the doors carefully
and not too far.