Main components
36
5.4.2
For variants of the DryStar 2000 CAN SM/CD 102
1
2
3
4
5
6
7
8
Fig. 17
Dryer slide-in unit 3 (cooling air)
1
Slotted nozzles for cooling air
2
Safety limit switch
3
Plug connector
4
Control knob
5
Unlocking button
6
Connecting piece for cooling air
7
Connecting piece for process exhaust air
8
Process exhaust air
The dryer slide-in unit (cooling air) cools the sheet
that has been heated through the drying process.
Cooling air is supplied to the slide-in unit via the con-
necting piece (Fig. 17/6). The process exhaust air is
connecting to the dryer cabinet via the connecting
piece (Fig. 17/7).
"
Note
You can set the width of the slotted nozzles
(Fig. 17/1) on the control knob (Fig. 17/4). This
allows you to adjust the air volume to suit your
requirements and ensures steady sheet travel.
Experimental value: 6mm.
"
Note
Fig. 17 shows the underside of the dryer
slide-in unit. The process exhaust air is drawn
in by the top side of the slide-in unit.