Contact us today for more details
Tel: +44(0)1473 725161 Email: [email protected]
Heidelberg 10” x 15” Platen Foil Blocking Conversion – FOIL EXPERT
Foil Expert
Features:
Quick and easy to install (self-installation)
Substantially constructed and mounted on the top of the press
Up to two full width rewind rollers (optional extra)
Each foil unit features a microprocessor control
Complex foil advance program to cope with demanding foil layouts
Hologram registration available (optional extra)
“Step-ins” even when running registered holograms
Foil system (2 Methods
)
1.
Using Fixed lays only will allow the use of the 1” Foil bar
2.
Using fixed lays and register lays see appendix 1
Features:
Comprises of spring loaded bar
Incorporates up to 6 foil rolls
Foil diameter 60mm (122m rolls) * See appendix 1
Controls foil tension from a full roll to the empty core
Two guide bars supplied to ensure the foil does not touch the die
Foil bar 1” or 25.4mm core size * See appendix 1
Number of pulls per length up to
99
Heated bed
Features:
Low profile toggle honeycomb heater plate
Single zone temperature controlled
Heat sensor is close to the surface of the bed so it accurately
measure the temperature of the die
Set for 6.35mm dies (can be modified for 7.0mm)
Light weight 6.5kg
Electrical system
Features:
Single phase 16 Amp, 3 pin plug
Stepper motor foil pull control – pull resolution- 0.1mm
Acceleration and deceleration for the stepper motor
Inch foil advance
Push button keypad (LCD)
110v / 220 – 240v
Temperature control system
