-2-
© heicko 2020 - Reproduction and reprinting of images, texts and other content for purposes other than purely private needs our express and written consent. We
reserve the right to take legal action against the unauthorized use of the content.
Technical changes, printing errors and mistakes reserved. Photos and other illustrations are not binding and may be similar to the original items.
Illustrations may vary from actual product depending on type and model.
HR120038G2_02_EN
Press „Up“ and „Stop“
simultaneously 2x
Connecting the emitter to the motor / external receiver -
for further instructions see manual of the motor / external receiver
The button assignment for the general functions is shown in the figure above on the previous page. The HR120038G2
does not
have the "P2" programming button familiar
from other emitters.
Important!
The function of "P2" is activated on the HR120038G2 by simultaneously pressing the "Up" and "Stop" button - see description below.
This also applies to the setting of the motor functions - see note above.
First put the motor into the connection
mode using the "P1" button according to
the motor instructions. Then continue as
shown on the right.
Press „Up“ 1x
Note!
- To change the
rotation direction, this
process must be repeated.
However, in the last step the
"Down" button must be
pressed instead of the "Up"
button.
