Heicko ERSDC1038-02, User Manual

Page: 31 / 44

-29-
HRSDC_ERSDC10.12_EN
x1 x1
6.8 Deleting of the limit positions
P2 P2
• When using the function, the blind can be in any position.
• This function deletes both limit positions.
Press P2
for 1 second
Press „Down“
for 1 second
Press P2
for 1 second
x1 x1 x1 x4
6.9 Add an emitter (Copy from emitter A to emitter B)
x1 x1 x1 x1 x1 x7
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A A B
6.11 Delete emitter B whilst emitter A remains active
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A A B
x1
x1
x1 x1
Press P1
for 2 seconds
6.10 Add a 2nd emitter on the motor‘s head
0
1
x1 x7
Press "Up" and "Down“
simultaneously for
1 second
+
B
B
This function is only possible if the limit positions have been set with emitter A.
x1
x1
x1
x5
6.13 Enable / Disable step function
Press either the "Up" or "Down" button for a short
movement (release within 2 seconds), press one of the
buttons for more than 2 seconds and the motor will start to
run continuously.
Press P2
for 1 second
P2
Press „Up“
for 1 second
Press „Down“
for 1 second
6.12 Delete emitter
Press P2
for 1 second
P2
Press „Stop“
for 1 second
P2
Press P2
for 1 second
• This function clears the connections from all emitters to the motor.
x1
x1
x1
x1
x1
x5
x1
x1
x1
x1
x1
x2
Note! - This function is not available when using the
controls HD05B, HD15BT, HR120033WA, HR120038G2,
HR1200-SUN-G2 and HR1300-WIND-G2!