To use your headset, your phone or music device should
support the following Bluetooth profiles:
Profile
Description
HFP (HandsfreeProfile)
Providing a wireless means for both
remote control of the Mobile Phone by
the Hands-Free device and voice
connections between the Mobile Phone
and the Hands-Free device.
Bluetooth Interference Issues
The quality of Bluetooth transmission may also be affected by the position of your music device.
Should you experience choppy or distorted audio, move the position of your music device or
phone to a different location until the signal improves.
Getting started
Before you can use your headset, you should first:
Charge the headset battery.
Pair the headset with a device, for example, a mobile phone.
Charging
The headset comes with a built-in rechargeable battery. We recommend that you charge the battery
before using the headset for the first time.
Connect the charger to the headset and to the mains.
The charging time is about 4 hours.During charging, the indicator shows a steady red light. When
the battery is fully charged, the indicator red light will switches off. When you using the headset,
if you hear a cadent tone, and the indicator red light flashes rhythmically, battery needs
recharging.
To charge, please use the handle on Charging Port Rubber Cover gently pull out the Cover, and
circumgyrate about 180 degrees. Expose the Charging Port and Plug the Charger Plug into the
BlueTooth headset’s Charging Port. At this time near the Control Buttons the indicator light turns
red when the battery is charging. As Figure2 and Figure 3 shown.