Viewed from the rear side the connectors are from left to right:
Signal input Phono / RCA, right / left DVD
Signal input Phono / RCA, right / left AUX
Signal input Phono / RCA, right / left CD
Balanced signal input XLR right / left
Digital Signal input Spdif / COAX stereo
Digital Signal input Spdif / OPTICAL stereo
Digital Signal input USB / USB stereo
Speaker output right
Speaker output left
AC Power connection 230V / 115V / 100V AC dependent on country. Fuse holder.
The preamplifier section of the H70 has two types of audio inputs: unbalanced audio signal with RCA
plugs (phono plugs) and true balanced audio signal with XLR plugs (pin 2 is positive phase, pin 3 is
negative phase and pin 1 is chassis earth).
HEGEL REMOTE CONTROL
Hegel H70 can be controlled by the included RC3 system remote control. As with other Hegel
equipment we have set the number of buttons to a minimum.
Inputs can be selected by pushing the IN+ or IN- buttons. With the red BAL button you can gain direct
access to H70’s balanced input. Volume levels are adjusted by pressing VOL+ or VOL-. Pushing the
MUTE button will quickly reduce the volume level. The RC3 system remote control may also be used
with other Hegel equipment, like a CD-Player.
The RC3 remote control use a standard CR2025 battery. To insert the battery, you open the “drawer”
on the bottom of the remote control. Ensure that you insert the batteries with the correct polarity.
Be careful not to drop the remote on the floor, as internal components may be damaged.
As a safety measure the batteries are not inserted during shipment.
