background image

14

15

Network settings

The amplifier has its own Network Con-
figuration page where you can change the 
amplifier’s network name and IP settings. 
To open the page, enter your amplifiers IP 
address in a browser window.
You can find the IP address in the amplifier’s 
menu under “Network”.

For detailed information on the 
Network Configuration page, 
supported formats and much 
more, please visit  

support.hegel.com

NOTE:

 Some of the features of the Hegel 

device require an internet connection. 

Wake up on Network

Even when the amplifier is in standby 
mode the network connection is active. The 
amplifier can be woken up from standby by 
starting playback to the Hegel.

Network Setup

Status Indicators

The Hegel device will display the network sta-
tus in the lower left corner of the display.

 
Network status 
is OK:

 

 
Network status is 

not

 OK:   

Troubleshooting

If you experience problems with connecting 
the amplifier to the network or have other 
network issues, please try the following:

Disconnect the power chord for at least 30 
seconds and then reconnect.

If that does not help, try the following:

Enter the amplifier menu and select factory 
reset.

Unbalanced Inputs

Balanced Inputs

Analog 2

Right

Left

Analog 1

Left

Right

Line Output

Variable

Speakers

Left

Right

Digital Inputs

Optical 2

USB

Optical 3

Coaxial Optical 1

Network

Amplifier circuit protected by Hegel US Patent No 6.275.104

Apparatet må tilkoples jordet stikkontakt

230VAC  Fuse: 4AT

RA

46

H120 Integrated Amplifier,

Hegel, Oslo, Norway

Serial number

Connection

To be able to use the amplifier’s network 
and streaming features, the amplifier needs 
to be connected to your local network. 
Connect your Hegel amplifier using an Eth-
ernet cable (not supplied) from the network 
connection (LAN - RJ45) port on the back of 
the amplifier, to your router. 

Streaming

AirPlay

When using AirPlay, you can send the music 
stream from an AirPlay compatible device 
to the Hegel device. All AirPlay compatible 
devices will detect the Hegel device in their 
list of AirPlay speakers.

When both devices are connected to the 
same network, the AirPlay icon will be dis-
played, and you can select the Hegel device 
as an AirPlay speaker. You are now ready to 
send the music stream to your amplifier.

Spotify Connect

When using Spotify Connect, you can send 
the music stream from Spotify to the Hegel 
device. 

Use your phone, tablet or computer as a 
remote control for Spotify. 
Go t

spotify.com/connect

 to learn how.

 

UPnP/DLNA

The amplifier can function as a Digital 
Media Renderer. This means that it can 
receive and play media files from a UPnP/
DLNA compatible media player. When us-
ing UPnP/DLNA streaming, you can send 
the music stream from locally stored files 
or music streaming services to the Hegel 
device. UPnP stands for Universal Plug and 
Play and is a widely used media stream-
ing protocol. That means it is supported 
by a host of products and applications. For 
details on how to set up your media player, 
please refer to the user manual supplied 
with the player. 

WARNING: When streaming to the Hegel 
device, always remember to check the 
player/device volume-setting before press-
ing play. The Hegel device will change its 
volume to the volume set in the player.

Summary of Contents for H590












Reviews: