17
Display On/Off
The DISP button on the RC8 remote control
may be used to turn the display of the H390
on or off. Hold the DISP button for more
than 1 second to turn the display off.
Press the button turn the display on.
Home Theater or Standard Analog Input
Most inputs can be changed into a Home
Theater input. This will set the volume to a
fixed high volume level. Use the RC8
remote to change the settings. Hold
“COMPUTER PLAY” until the setup menu
appears. Use computer prev/next to
navigate to “HT” and press “COMPUTER
PLAY” to select this submenu. Now use
“COMPUTER NEXT” to maneuver to the
input you want to change into a fixed level
input. Press “COMPUTER PLAY” to toggle
between a fixed level input or normal vari-
able input. Now don’t press anything for
15sec, and the H390 will return to normal
mode.
WARNING: Activating Home Theater sets
the volume at a high fixed level. This may
harm your speakers if a fixed level input is
connected.
Reset to Factory Default Settings
By pressing and holding the DAC+ button
while pressing Mute on the RC8, the H390
will be reset to factory settings. This will
clear all user defined settings, including IP
settings, and reinitialize the H390.
Power Up Volume
A user defined volume value may be used as
the power-up volume. The current volume is
set as the power-up volume by pressing and
holding the DAC+ button while pressing Vol-
on the RC8 remote control.
Max Volume
A user defined volume value may be used as
the max volume.
The current volume is set as the max volume
by pressing and holding the DAC+ button
while pressing Vol+ on the RC8 remote
control. To reset, put to max voulme, press
and holding the DAC+ button while pressing
Vol+ on the RC8 remote control.
DAC-Loop
This function makes it possible to upgrade
the digital inputs of the H390 with an exter-
nal high-end DAC. This is done by conecting
the re-clocked coaxial digital output of
the H390 to the external DAC. The output of
the external DAC will need to be connected
to the XLR input of the H390.
Use the RC8 remote to change the settings.
Hold “COMPUTER PLAY” until the setup
menu appears. Use computer prev/next to
navigate to “DAC-LOOP” and press “COM-
PUTER PLAY” to select this submenu. Press
“COMPUTER PLAY” to turn on/off.Now don’t
press anything for 15sec, and the H390 will
return to normal mode.
Special Functions
