Hegel CDP4A User Manual Download Page 7

 

7

USE & PLACEMENT OF CD-PLAYER 

 
The HEGEL CDP4A should be placed on a flat, hard surface for proper isolation against vibrations.  
 
The CD-player must 

NEVER

 be placed on top of an integrated amplifier or power amplifier. The heat 

from the amplifier will make the laser pick-up system work worse than normal, and also the life-time 
of the laser unit will be reduced when heated up by an amplifier standing directly below the CD-
player. 
 
A certain space is required for air circulation above and below the CD-player. The CD-player must 
never be placed on a carpet or similar surface that obstructs air circulation through the component. Nor 
must it be covered while in use or placed on a narrow shelf or in another confined space. 
 
The CD-player performs best after being switched on for about 30 minutes for heating up. 
 
The CD-player will need some time of break-in before maximum sound quality can be experienced.  
 
 

CLEANING 

 
The top cover, side panels and knobs are made of brushed and anodized aluminum, while the front 
panel is made of glass bead blasted and anodized aluminum. Fingerprints or stains on the front panel, 
knobs or top cover can be removed with a cloth moistened with warm water or with a mild detergent 
suitable for cleaning mirrors and bathroom. 
 
 

TRANSPORT AND SHIPPING OF CD-PLAYER 

 
If you are moving the CD-player over a longer distance or packing the CD-player for shipping please 
follow these instructions to secure the CD-drawer from opening during transport: 
 
1.

 

First put a plastic bag around the CD-player, placing the front panel of the CD-player tight against 
one of the sides of the plastic bag.  

 
2.

 

Insert the CD-player in the two white shock absorbers, one in the left side and one in the right side 
of the player  

 
3.

 

Use a 40-50 mm wide plastic tape to make two tight turns around the CD-player in the front to 
back direction, being sure to hold the CD-drawer and knobs in place during transport. 

 
 
 
 
 
We wish you good luck in setting up and connecting your new CD-player and hope that it will give 
you many years of joyful natural sounding music experiences! 

Summary of Contents for CDP4A









Reviews: