Hefter TF MINI plus Operating Manual Download Page 15

3.   WORKING WITH THE MACHINE 

  

 

14 

 
 

3.8. Additional set-ups and indications 

 
3.8.1    Set-up of the 

feeding time

 at the TF Mini 

plus

 & TF Multi 

plus

 for the 

daily mail

 

          The machine starts automatically with the daily mail mode according to an  
  

adjustable Time (

factory settings: TF MINI +: 1.0 sec., TF MULT +: 2.0 sec.)  

  

 i.e. e.g. 1,0  seconds (MINI +) after inserting the sheets into the daily mail channel! 

         a.  The feeding time can be set per key stroke! Press the key “reset” for about 4 
    

seconds. 

b.  Then, the time set will be displayed. You can reduce this time by pressing “>” or 

extend it by pressing “>>”. 

         c.  By pressing the key “reset” again you will reach the standard opearting mode. The 
  

time lastly displayed was set and stored. 

 
3.8.2    Set-up of the 

feeding time

 of the individual 

TF Multi

 

plus

 

feeding stations 

 

         The feeding times of the individual feeding stations are different since the distances 
         from each station to the folding wheels vary. – This means that the sheets are fed 
         with different time lags due to the different distances so that they will reach the 
         folding wheels at the same time. 
         Distance feeding station 1 = time lag 1 (

factory settings: 0.50 sec

.)          

         Distance feeding station 2 = time lag 2 (

factory settings: 0.30 sec

.)                                       

         Distance feeding station 3 = time lag 3 (

factory settings: 0.40 sec

.)                                           

 
         a.  The feeding time can be set per key stroke! 
 

Press the respective “feeding station key” about 5 seconds.  

         b.  Then the time set will be displayed which you can reduce by pressing  

“>” or extend by pressing “>>”. 

 NOTE: 

Change the feeding time only stepwise and only from one station at a time 

  

so that you can find out if the folding result has been improved. 

         c.  By pressing again the selected “feeding station key” you will be back in the 
              standard operating mode; the lastly displayed time was set and stored. 
 

3.8.3 

Display 

“Total Number of folds” 

a. The 

total number

 of any folds made with this folder can be displayed per key 

    stroke! Just press the keys 

“10”, “1” and Reset simultaneously

.  

          b. Then the total number of folds will be displayed in steps of thousands,  
 

e.g. 0001. = 1000 folds and . 0012 for total 1012 folds. 

          c.  The display will disappear after a few seconds and you will be back in the  

standard operating mode. 

 
 
 
 
 
 
 
 
 

Summary of Contents for TF MINI plus





















Reviews: