background image

If your family includes children

3

The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Keep detergents out of the reach of children, who must also be kept away from the dishwasher

when it is open.

If a fault occurs

If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from

the wall socket. Then, consult the section entitled, "Finding fault" .If you cannot solve the problem,

contact a service center.

Only specialised personnel are authorised to make repairs.

If the supply cord is damaged, it must be replaced by the manufacture, its service agent of similarly

qualified persons in order to avoid a hazard.

To maintain the EFFICIENCY and SAFETY of this appliance,we recommend:

- call only the Service Centers authorized  by the manufacturer.

- always use original Spare Parts.

When disposing of old appliances

Appliances which are no longer being used must be made  inoperable by cutting the power supply

cord and removing  the door lock.

Take the appliance to a designated waste disposal center.

Dangerous voltage

Warning

Children could get locked in the appliance (risk of suffocation)

or get stuck in other positions. Therefore: Remove the mains

plug, cut the mains wire and set aside. Damage the door lock so

that the door can no longer be closed.

en

Summary of Contents for HEC12EFM Series





























Reviews: