Assembling your stand
1. Remove the tubes from the
carton.
2. Collect the accessories (plus
extra chain and carabiner and/or
swivel if applicable).
3. Refer to the stand diagram
(previous
page)
before
proceeding.
4. Start with the X-piece and
insert the 4 legs, using the
twist-in bolts to lock them in.
Attach the feet caps.
5. Insert the next 2 vertical tubes
above the back legs, and tighten
them.
6. Insert the top 2 poles and
tighten them. Make sure to
have them on the correct sides
(so the top of them come
together flat).
7. The cap-head bolt and
nut go through the top
2 poles, to tighten them
together. Then the carabiner
goes through the remaining
hole.
8. If having an extra chain and
carabiner or swivel, then those
can be added below the
carabiner eg.
Carabiner -> swivel -> carabiner -
> swing
Or
Carabiner -> chain -> carabiner -
> swing.
9. Stand assembly is finished.
Summary of Contents for X-Stand
Page 2: ...Stand Diagram ...
