4
Parts of the SY-CLQ10
Parts indications:
1.
Reflecting Plate
2.
Rear Cover
3.
Selector Switch
4.
Tip-over Switch
5.
Quartz Tube
6.
Protection Next
7.
Front Cover
Using the SY-CLQ10
Before first use:
• Take the appliance and accessories out of the box. Remove the stickers, protective foil or
plastic from the appliance.
• Connect the power cable to the socket. (Note: make sure the voltage which is indicated on
the appliance matches the local voltage before connecting the appliance. 220-
240V~50/60Hz
• Make sure to place the appliance on a flat, dry and stable surface. This appliance is only
suitable for indoor and for domestic use.
Using the heater:
•
Make sure the selector switches (3) are all set to “0”
•
Connect the appliance to the power supply.
•
Turn on the | selector switch for 400W heating power.
•
Turn on the || selector switch for 800W heating power.
•
Turn on both | and || selector switches for 1200W heating power.
•
After using make sure both the selector switches (3) are set to “0” and then remove the
plug from the power supply.
Safety control
To avoid damage and danger by overheating, the heater is fitted with an electric protector/tip
over switch function that switches off the heater in case the heater tilts or falls.
Summary of Contents for SY-CLQ10
Page 1: ......