PROGRAMMING THE OUTDOOR OUTLET
This device is preprogrammed for immediate use.
TO PAIR OUTLET TO REMOTE CONTROL:
• Insert the Outdoor Outlet’s plug into an outdoor-safe power outlet.
• Press and hold the ON/OFF button on the Outdoor Outlet for 3-5
seconds until the blue LED indicator starts flashing slowly.
• Release the ON/OFF button on the Outdoor Outlet and press the OFF
button on the remote control for 2 seconds to pair it to the Outdoor
Outlet.
• After a few seconds, the blue indicator light should change from
flashing to off to indicate the set up is complete.
• If pairing fails, please repeat.
• REMOTE CONTROL SETTINGS: Press the on button on the remote
control, the red LED indicator will be on to show the device is working.
Press the off button on the remote control, the red LED indicator will
be off to show the device has stopped working.
RESETTING THIS DEVICE
The Outdoor Outlet can be unpaired and reprogrammed should it ever
become unresponsive.
TO UNPAIR THE OUTDOOR OUTLET
FROM THE REMOTE CONTROL:
• Press the programming button on the Outdoor Outlet until the
indictor light begins to flash rapidly. Indicator flashing will change
from slow to fast.
• Release the programming button, then press it once. Indicator light
will turn off.
• All programming has been canceled.
WARNING:
To reduce the risk of fire, electric shock or personal injury, please strictly follow
these instructions.
1. To prevent water immersion, the outlet must be mounted in a vertical position
at least 2-feet above ground level with the outlets facing downward.
2. Do not immerse in water.
3. Do not connect any devices which may exceed the maximum 15 amps rating of
this remote Outdoor Outlet.
4. Do not disassemble or attempt to repair this product.
5. Children should not use remote outlets without supervision.
6. This product and its packaging are not intended to be used as toys and should
be kept away from children at all time.
7. Used batteries should be disposed of safely and environmentally.
TROUBLESHOOTING
If the Outdoor Outlet doesn’t respond to the remote control:
•
Replace remote control battery.
•
Check the Outdoor Outlet plug is securely placed into the power outlet.
•
Reset and reprogram the device to the remote control.
•
If the frequency from this remote control interferes with other remote
controls, reprogramming it should eliminate interference. See instructions for
“RESETTING THIS DEVICE”
WARRANTY
: HeatTrak, LLC guarantees this product to be free from defects in
material and workmanship for a period of two (2) years from the date of purchase.
Warranty is void if damage is caused by misuse or improper installation. Please
contact us if you have any questions.
DISCLAIMERS
: HeatTrak makes all attempts in providing accurate information
on all media. However, HeatTrak makes no warranty as to the accuracy of the
information, including representations and warranties about the accuracy of the
product specifications, marketing material, product availability, new product launch
dates and all other content herein. HeatTrak reserves the right to update and
change information without prior notice. All information provided is provided ‘AS IS’
with all faults without warranty of any kind – either expressed or implied. HeatTrak
and its suppliers disclaim all warranties, expressed or implied without limitations.
HeatTrak and its suppliers shall not be liable for any indirect, special, consequential
or incidental damage including, without limitation, post profits or revenues, cost of
replacement goods, loss of damage to data arising out of the use or inability to use
any HeatTrak product, damages resulting from use of or reliance on information
present, even with prior notice to HeatTrak. All non-HeatTrak trademarks, logos,
brands and products are trademarks or registered trademarks of their respective
owners. HeatTrak does not claim any relation. Mention of non-HeatTrak products
and brands are for information purposes only and does not constitute an endorse-
ment or affiliation.
