
9
Protection settings
Press Menu then
button to enter
protection settings page. You can
set Over Protection temperature &
Low Protection temperature with
the and buttons. Press APPLY
to save the changes.
High protection:
This is an overheat protection setting designed to monitor the floor
temperature and limit it to a level set by you. If the system reaches the
set protection temperature the system will shut off automatically.
Low protection:
This is a frost protection mode designed to function when the thermostat
is switched off. If the ambient temperature reaches the set protection
temperature the system will automatically switch on to maintain a
minimum temperature.
Please note:
The upper limit should be no higher than 28
0
C to conform with
European regulations. Check with your floor finish manufacturer for
guidelines on maximum recommended underfloor heating temperature.