MULTIPOINT
11
11.0 ACCESSORIES
The heater can be used to supply several hot water outlets via conventional taps. It is
not recommended for supplying a shower. Individual site demands should be
considered when choosing capacity and the number of outlets to be served.
A Thermostatic Blending Valve can be used in conjunction with this unit. Accessory
Pack C is recommended. Follow the installation instructions supplied with the valve for
connection to the system.
12.0 USER INSTRUCTIONS
12.1
This Heatstore unvented water heater stores water at the temperature set on the
adjustable thermostat. This can be set to give temperatures in the range of 10 to
70
o
C. To avoid any risk of freezing when the heater is not in use for long periods
during the winter months, do not switch off the electrical supply and set the
thermostat to its minimum position. N.B. This will not protect other system
pipework.
12.2
The indicator light will be illuminated when the unit is heating.
12.3
To ensure the heater continues to operate at its optimum performance it should
be periodically maintained in accordance with the instructions given under the
Sections headed MAINTENANCE.
12.4 IMPORTANT NOTES TO USER
Do not block or restrict the discharge from any safety valve fitted.
Do not tamper with any safety valve fitted.
If water discharges from any safety valve fitted, switch off the electrical supply to
the unit immediately. Contact a qualified installer. Do not turn the electrical
supply on again until the unit has been checked and approved by a qualified
installer.
11
