
2.
A means for disconnection in all poles
must be
incorporated in the fixed wiring in accordance with the wiring rules.
We recommend a ceiling switch mounted in a convenient position.
3.
Cut back cable as in diagram 9. Connect cable to terminal block making sure that all the retaining screws are
VERY
TIGHT
and that no cable insulation is trapped under the screws.
WARNING:
FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN FAILURE OF THE TERMINAL BLOCK
4.
WARNING: THIS APPLIANCE MUST BE EARTHED
5.
Refit the detachable corner section back into the backplate.
6.
Fit the front cover back into position making sure that the control knob is aligned correctly with the flow valve
(see diagram 9).
If control knob drive is removed the mask mechanism needs re-aligning, Turn flow valve fully clockwise, and position
mask to cover all the lights and then replace drive in position shown in diagram 9.
Check that when the flow valve is turned fully anti-clockwise that all lights are visible.
Re-fit the cover and secure with top and bottom fastening screws.
7.
Operate the shower first without the shower handset to flush out particles, fit the shower handset and then operate
the shower as on page 2 and check:
a. That the water gets to a satisfactory temperature.
b. Water flow can be adjusted by knob
“E”.
c. Power selection does give a change in water temperature and power lights illuminate.
d. Check again for leaks
e. That the holes in the spray plate are not blocked
7.
DEMONSTRATE OPERATION TO USER
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.