THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171
Ph: +61 (0) 3 9562 3455 Fx: +61 (0) 3 9548 3979 www.thermofilm.com.au
H E A T S T A R
R A D I A N T P A N E L H E A T E R S
Then use the 2 screws provided to lock the
heater into the bracket.
4.3 T-Bar Ceiling Mounting
Remove ceiling tile from the standard 600 x 1200 T-Bar ceiling grid and fit the heater into position.
4.4 Flush Mounting – Plaster Ceilings
Purchase a standard 600 x 1200 flush mounting bracket (same as used for skylight brackets). Fit flush
mounting bracket into ceiling, and locate heater into bracket.
4.5 Security Mounting – Prison Locations
Special security mounting brackets are available from Thermofilm. These are suitable for high security
locations and areas where vandalism may occur.
5. Installation and Operating Instructions – THP 450
5.1 Model THP 450
The THP 450 is designed for wall or ceiling mounting.
5.2 Ceiling Mounting
Fix mounting bracket in the desired location
with suitable fixing devices more than capable
of safely supporting the heater.
The fixing devices should be suitable for the
type of mounting surface; plaster, timber,
concrete etc
Position the heater onto the bracket
Then use the 2 screws provided to lock the
heater into the bracket.
5.3 Wall Mounting
Fix mounting bracket in the desired location
with suitable fixing devices more than capable
of safely supporting the heater.
The fixing devices should be suitable for the
type of mounting surface; plaster, timber,
concrete etc
