6
Revised 2021
RECOMMENDED MAINTENANCE
MAKE SURE TO TURN OFF THE UNIT, UNPLUG
AND LET THE MACHINE COOL DOWN BEFORE CLEANING *
NON-STICK COVER & SEAL PLATE
The seal plate can be cleaned, as needed, with a mild spray degreaser. This should be applied to a soft cloth or paper towel
and then wiped on the plate while cold. DO NOT WASH DOWN SEAL PLATE OR SPRAY ANY LIQUIDS DIRECTLY
ONTO THE PLATE.
Replace covers as needed (approximately every 3 months).
Polyamide Film Wrap seals & protects seal plate from moisture
CUT OFF ROD
①
Make sure that the unit is turned off and the cut off rod is cool to the touch.
②
Cover the unit with paper towels to protect it from overspray and debris.
③
Spray the cut-off rod generously with an FDA approved “Degreaser.”
After soaking for a few minutes, lightly scrub the surface of the Cut-off rod with a nylon based product (Scotch-Brite™).
Wipe the surface clean of debris and residue with clean paper towels or cloths and repeat as needed.
CLEANING THE UNIT
The 700ES can be wiped down using mild cleaning detergent and a soft cloth or paper towels. DO NOT HOSE DOWN OR
SUBMERGE THE UNIT.
