Heatrae Sadia Multipoint Instantaneous, Fitting Instructions Manual

Page: 5 / 16

5
Standards and approvals
`
Complies with the requirement of EN 60335-2-
35.
`
British Electrotechnical Approvals Board (BEAB)
approved.
`
Complies with European Community Directives
(CE).
`
Complies with UK water regulations, kiwa
approved
3.2 Dimensions and connections
Dimensions
Height - 210mm
Width - 160mm
Depth - 104mm
3.3 Electrical Diagram(s)
Neon
7kW / 9kW
Inner
container
red
black
green/yellow
Pressure
switches
N L
Terminal
block
red
red
red
red
red
Figure 1 – Wiring Diagram
3. Technical specifications
3.1 Technical data
Model numbers
7.0kW - 95 050 424
9.0kW - 95 050 425
Connections
Inlet / Outlet connection - 1/2” BSP male
Water entry point - bottom
Cable entry point - bottom or rear
Electrical rating
6.4 - 7.0kW 230 - 240V
8.2 - 9.0kW 230 - 240V
Rated pressure
7kW / 9kW Minimum supply pressure 0.1Mpa (1 bar)
Maximum supply pressure 0.7Mpa (7.0 bar)
Enclosure rated
IP X5
Materials
Backplate, cover - ABS
Element(s) - copper sheathed rod type
Inner container - glass reinforced nylon
Supplier’s name or trade mark Heatrae Sadia Multipoint Instantaneous
Supplier’s model identifier 7kW 9kW
The declared load profile XXS XXS
The water heating energy efficiency class of the model A A
The water heating energy efficiency in % 38.5 38.5
The annual electricity consumption in kWh 479 479
Daily fuel consumption in kWh 2.206 2.206
Specific precautions that shall be taken when the water heater is
assembled, installed or maintained and disposed of at end of life
See sections 3 - 10
Table: Technical parameters in accordance with European Commision regulations 814/2013
and 812/2013