Heatrae Sadia Megalife 100E Installation Manual Download Page 19

19

Goods are guaranteed and sold subject to our standard conditions of sale. A copy of these conditions will be supplied 
on application.

11.1 Guarantee Terms

Heatrae Sadia guarantee the Megalife immersion heater for a period of two years from the date of purchase, with 
the exception of damage due to scaling.

Electrical parts and thermal controls are guaranteed for a period of two years, from the date of purchase.

The stainless steel vessel is guaranteed for a period of 25 years against faulty manufacture or materials provided 
that :-
i)  It has been installed by a competent installer and as per the instructions contained in this manual and all relevant

Codes of Practice and Regulations in force at the time of installation.

ii)  It has not been modified in any way other than by Heatrae Sadia Heating.
iii)  It has only been used for the storage of potable water.
iv)  It has not been installed in a location liable to be subjected to frost, nor has it  been tampered with or been  
 

subjected to misuse or neglect.

v)  No factory fitted parts have been removed for unauthorised repair or replacement.
vi)  Within 60 days of purchase the user completes and returns the certificate supplied along with proof of purchase

to register the product.

Evidence of purchase and date of supply must be submitted.

This guarantee is not valid for installations outside the United Kingdom and the Republic of Ireland. For installations 
outside these territories please contact either the Heatrae Sadia Heating Export Department (Tel: +44 1603 420191) 
or Baxi International (Tel: +44 1926 478323) for further details of the guarantee terms and conditions applicable.

This guarantee does not affect your statutory rights.

Environmental Information

This product is made from many recyclable materials, therefore at the end of its useful life it should be disposed of 
at a Local Authority Recycling Centre in order to realise the full environmental benefits.
Insulation is by means of an approved HCFC and CFC free polyurethane foam.

The pace of product development is such that we reserve the right to change product specifications without notice. 
We do, however, strive to ensure that all information in this leaflet is accurate at the time of publication

11: Guarantee

Summary of Contents for Megalife 100E





















Reviews: