Heatrae Sadia HSD-90103 Instruction Manual Download Page 7

 

Operation 

 

IMPORTANT 

Before using, check the intake grille for possible blockage by fluff, hair, etc. 
 

DRYING 

To start the Body drier, remove the wind-out handle from its housing. The body 
drier will be shut off automatically after 18 minutes working.  

To press the temperature controlling button to change the wind temperature. The 
sign “+” is for temperature increase. The sign “-” is for temperature decrease. The 

wind temperature is shown on LED. 
To shut off the body drier, put back the wind-out handle to the housing.  

 
The body drier is fitted with 230V~, 50Hz and 115V~, 50Hz shaver sockets. 

These sockets, which can be accessed by lifting a special protection flap (fig. 1b), 
must only be used to run or recharge electric shavers (max 20VA). 

IMPORTANT: 

never connect other appliances such as electric coffee machines, 

heaters, etc. to these sockets. The body drier is fitted with an electric timer which 

turns the appliance off automatically after a preset time (18 mins). To turn it back 
on again, simply replace the wind-out handle in its housing and then remove it 

again. 

 
 

CARE 

This appliance should be cleaned with a dry cloth. Never rinse the appliance with 

water. 
Check the air intake grill regularly, keeping it clear of dust, fluff, hair etc. 

 
Cable Connecting with Terminal 

In the case of the coloured cable wires not corresponding with the markings 
identifying the terminal follow these steps 

1. Connect BROWN wire to terminal “L” (or coloured red) 
2. Connect BLUE wire to terminal “N” (or coloured black). 

 
Important!

  

Cut off power supplier when connecting the cable to terminal. 

 
CONFORMITY WITH DIRECTIVES 

Conforms with relevant European Directives 

 

ENVIRONMENTAL PROTECTION 

• (WEEE) Waste Electrical and Electronic Equipment 

Waste electrical products should not be disposed of with household 
waste. Please recycle where facilities exist. Check with your local 

authority or retailer for recycling advice. 
• This appliance complies with the RoHS directive which restricts the 

use of certain hazardous substances in electrical and electronic 

equipment. This directive bans the placing on the EU market of new electrical and 

Summary of Contents for HSD-90103









Reviews: