Pairing the Thermostat
To pair the thermostat with the receiver, follow these steps;
On the receiver;
Press the Pair button.
The Communication LED will come on
On the thermostat;
Press Prog and then Setup
At the top of the LCD, you will see 01.
Use the up arrow to select 05 to enter the pairing function
Press Zone 1 or Zone 2 to select the relevant zone.
(Two PRT-WTS can work with a single receiver, offering a two zone system)
In the centre of the LCD, you will see 01. This is the channel
address. The default setting of 01 can be used in most cases, but
should be changed when a conflict is detected between other RF
devices.
Use the Up/Down keys to enter the address
Press Setup to Pair the thermostat.
3
