Heatmiser PRT/HW-WTS, User Manual

Page: 10 / 21

Changing the Hot Water Times

Press Prog and select Timer

You will see Time 1 and On Flash

Use the Up/Down keys to set the time for the 1
st
switching time

Press Off and then use the Up/Down keys to set the off
switching time.

You should now repeat for the Time 2-4

Press Day to select the next day. In 5/2 day mode, the
thermostat will highlight Sat, Sun prompting you to program the
switching times for the weekend. In 7 day mode, the thermostat
will highlight Tuesday.

When complete, press Done to store and exit.
Locking the Keypad
The thermostat has a keylock facility. To enable this press the bottom
right corner of the display and hold for 10 seconds. When activated,
you will see the lock symbol. To cancel, repeat the steps above.
9