10
9
Wireless
Series
Model
: PRT-EW
Configuring the Thermostat
With the thermostat turned OFF:
•
Press & hold the Clock button until the LCD screen comes on ........................
•
You will now see 01 in the top right hand corner. This is feature 01.
•
Press the clock again until you see feature 07 (receiver address) ...................
•
Use the Up/Down keys to set the address .......................................................
A unique receiver address must be set for each receiver installed.
(RF is disabled if receiver address is set to 00).
•
Press A to confirm settings and the display will go blank ...................................
Pairing the RC2-W Receiver
•
On the receiver, press and hold the Pairing button until the Comms LED lights up.
•
With the thermostat turned OFF, press & hold the A button for 5 seconds ...........
•
The thermostat will send a signal for 1 minute and will flash the RF signal icon.
•
If pairing is successful, the Comms LED on the receiver will flash.
•
Press the Power button on the thermostat once to confirm pairing ..............
If pairing is unsuccessful, check feature 07 has been configured correctly.
To eliminate a possible signal issue, reposition the thermostat closer to the receiver
and repeat the pairing process again.
Batteries have a fixed lifespan and will need to be replaced occasionally to
ensure the thermostat operates correctly.
The thermostat will inform you when the batteries need to be replaced by
displaying the battery icon on screen.
Note: You must replace the batteries within 1 minute of removal in order to retain
the current clock and comfort level settings.
Replacing the Batteries
Battery Icon
(Flashes)
