A-001-MAN Heatlie IGE600 Instruction Manual V3.1
Updated Feb 2017
7
4.6.
Non Zero Clearance
When there is no shelf or other barrier sitting directly underneath the barbecue, and no panels of
the barbecue come in direct contact with the cabinet, except the bench surface, this is termed a
“non-zero clearance” installation and this will form the majority of installations for the Island
Gourmet Elite.
4.7.
Non Zero Clearance Ventilation
This requires 400cm
2
of ventilation which can be located anywhere in the cabinet. Figure 3
shows the ventilation holes at the top and bottom of the Heatlie Island Gourmet cabinet.
4.8.
LPG Gas Cylinder Compartment
If using LPG, the gas cylinder needs to be located in a ventilated compartment that is
completely separate from the compartment which houses the barbecue. Figure 4 shows the
separate LPG gas cylinder compartment in the Heatlie Island Gourmet Elite cabinet. The
ventilation for this compartment must be at the top and bottom of the compartment, with each
opening at least 200cm
2
. The upper edge of the bottom opening must not be more than 120mm
above the base of the cabinet, as per Figure 5.
A hole, not exceeding a diameter of 20mm, must be installed to enable the hose fitting to pass
through the cylinder compartment to the barbecue. Refer to AS5601 for pipe sizing details.
Figure 3 Heatlie Island Gourmet Cabinet
All manuals and user guides at all-guides.com
