Chrono Mode
[Mode]
Configuring the hours sequence:
[Chrono]
a)Set the time and day of the week.
[+]
[-]
[Mode]
[+]
[-]
[Mode]
[Mode]
b)Configuring the weekly program.
[+]
[-]
[Mode]
This operating mode allows the definition of a weekly program configurable for each day of
the week.
To enter into this mode, press the
key until the display shows the "Chrono" icon.
Press the
key to start the programming procedure.
-The blinking number shows the day of the week: press
and
keys to set the correct
day, then press
to confirm.
-Press the
and
keys to set the hour then press
to confirm and proceed with
the configuration of the minutes.
-For configuring the minutes, repeat the same procedure and confirm with the
key
at the end.
The procedure starts automatically from day 1, and requires specifying the desired
temperature (either “Comfort” or “Off”) for each hour of the day. This is done by pressing for
the current hour either the
key (for setting the “Comfort” temperature) or the
key (for
disabling the heating element). Once one of the two keys is pressed, the configuration
process moves to the following hour (for a total of 24 steps).
The "Comfort" temperature is represented with a filled rectangle while the “Night”
temperature is represented with an empty space.
Example
Press
to confirm and proceed repeating the procedure for the following day.
Once the configuration of the seventh day has been completed, the program returns to the
previous operating mode.
When the Chrono mode is active, the “On/Stand-by” LED turns amber.
The “Mode” LED turns green during the “Off” period and it turns red during the “Comfort”
period.
Page 10
Comfort
OFF
“SMART Program ”
Electronic control for towel radiators
Rel. 01 - March 2016
