Heatilator • RAVE4013I-D • 2328-900 Rev. F • 9/17
56
The Deco and Illusion decorative fronts are approved for
inside fit applications. Non-combustible finishing materi
-
als up to 4 inches thick can be installed around the front
(left, right, top, and bottom).
For inside fit applications, the decorative front must be in
-
stalled tight to the finishing flanges and must not overlap
any finish material.
The Deco front requires a 1/2 inch clearance between
the outer edge of the decorative front and inside edge of
the surrounding finish materials.
HHT recommends that
the front be temporarily installed as a template, traced to
ensure the finishing materials will fit properly, and then
removed.
FACTORY-INSTALLED
NON-COMBUSTIBLE
BOARD
DRYWALL OR
EQUIVALENT
(1/2 IN.)
0 - 4 IN.
20-1/2 IN. (ILLU-42-**)
22-1/2 IN. (DECO-42-**)
APPLIANCE OPENING (HEIGHT)
3-1/4 IN. (ILLU-42-**)
4-1/4 IN. (DECO-42-**)
0 - 4 IN.
1 IN. (ILLU-42-**)
2 IN. (DECO-42-**)
Figure 13.11 Inside Fit Method
Non-Combustible Finish Materials
0 Inches to 4 Inches Thick Inside Fit Method
Reference dimensions for the Deco and Illusion fronts installed
on the appliance are shown in Figure 13.14 and Figure 13.15.