Heatilator MTB28, Installation Instruction, Page: 2 / 8

Heatilator • MTB28 Refractory • 4058-229 Rev B • 04/08
2
CLOSED
OPEN
Figure 3.1 Manual Shutoff Valve
Required Tools
Phillips screwdriver
Safety Gloves
A. Turn off the Gas and Electrical Power
• To turn off the gas, locate the manual shutoff valve in
the control area in the bottom of the appliance. Turn the
manual shutoff valve so it is perpendicular to the gas line
(Figure 3.1).
1 1
Preparation
C. Remove Front Log
• Remove the left screw holding the front log (Figure 1.2).
• Remove the right screw located behind the right side of
the log (Figure 1.3).
• Remove Log
Figure 1.2 Remove Left Screw-Front Log
• If electricity has been brought to the appliance, shut off
all power by turning off the appropriate circuit breaker or
removing the fuse in the electrical panel. Remove D-cell
batteries from the battery pack.
B. Remove Screen & Glass from Appliance
• See appliance owner’s manual.