Heatilator • GBST4336I, GBFL4136I • 2135-900 • 2/08
34
F. Install the Log Assembly
STEP 1. CAUTION!
Logs are fragile!
Carefully remove the logs and cardboard tray from the inside of the fi replace.
See Figure 14.3. Remove the microfoam and inspect the logs for damage. Inspect the four factory installed logs for
damage. Locate the pilot in order to verify your position in relation to the appliance. See Figure 14.4
Log Set Assembly: LOGS-2129
Models: GDST4336I, GDFL4136I, GDCL4136I, GDCR4136I,
GBST4336I,
GBFL4136I
LOG PLACEMENT
INSTRUCTIONS
Figure 14.4 Factory Installed Logs and Pilot Position
STEP 2. Log #1 (SRV2129-704):
Place Log #1 on Log A. The end and bottom of Log #1 fi t into the indentation on
Log A highlighted in Figure 3. The Y-shaped end of Log #1 will rest on the smooth area of Log B as shown in Figure 14.6.
CAUTION: DO NOT reposition logs that have been
factory installed!
Follow these instructions to position
the logs that were packaged separately.
Figure 14.6 Placement of Log #1
1
1
HUMP
HUMP
C
C
1
1
2
2
3
3
A
A
B
B
C
C
D
D
Figure 14.3. Log Assembly Location
Figure 14.5. Placement of Log #1
B
B
A
A
1
1
1
1
A
A
PILOT
PILOT
PILOT
PILOT
PILOT
PILOT
Figure 14.2 Log Assembly Components