Heat & Glo • CFL-24NG/LP, CFL-24NG/LP-B, CFL-24NG/LP-C • 481-926 Rev. E • 9/21
2
LOG #7: (SRV446-702)
Set log #7 on the top of log #2 to the right (use flat area).
The pointed end should be toward the center of the burner,
and should rest underneath the pointed end of log #6.
Tilt up log #6 to accommodate the placement of log #7.
Make sure that the log will clear the ports on the top of
the burner.
88
10
10
77
99
FLAT AREAS (For log #8)
LOG #8: (SRV481-703)
Hold log #8 with the bark detail toward the left. Lay the back
end of this log on the right flat area located on the top of
the back log. Rest the front end of this log on the flat area
to the left of the burned area of log #1.
LOG #10: (SRV446-706)
Hold log #10 with bark detail toward the top and the
burned area toward the right. Set the back end of the log
on the left flat area located on the top of log #5. Rest the
front end of the log on the top flat area of log #6.
LOG #9: (SRV402-701)
Hold log #9 with the pointed end towards the back and
the bark detail towards the top. Set the front end on the
flat areas of log #2 toward the right, then lay the back end
(pointed end) onto the flat area of the corner of log #8.
FLAT AREAS (For log #10)
FLAT AREAS (For log #9)