Heatilator CD4236-MOD Owner'S Manual Download Page 6

Heatilator  •  CD4236-MOD, CD4842-MOD Owner’s Manual  •  2241-902 Rev. C  •  11/15 

6

B. Glass Speci

fi

 cations (Tempered)

Hearth & Home Technologies appliances manufactured 
with tempered glass may be installed in hazardous lo-
cations such as bathtub enclosures as de

fi

 ned by the 

Consumer Product Safety Commission (CPSC). The 
tempered glass has been tested and certi

fi

 ed to the re-

quirements of 

ANSI Z97.1

 and 

CPSC 16 CFR 1202 

(Safety Glazing Certi

fi

 cation  Council 

SGCC# 1595

 and 

1597

. Architectural Testing, Inc. Reports 

02-31919.01

 

and 

02-31917.01

).

This statement is in compliance with 

CPSC 16 CFR Sec-

tion 1201.5 

“Certi

fi

 cation and labeling requirements” 

which refers to 

15 

U.S. Code 

(USC) 2063 

stating “…Such 

certi

fi

 cate shall accompany the product or shall otherwise 

be furnished to any distributor or retailer to whom the 
product is delivered.”
Some local building codes require the use of tempered 
glass with permanent marking in such locations. Glass 
meeting this requirement is available from the factory. 
Please contact your dealer or distributor to order.

C. BTU Speci

fi

 cations

A. Appliance Certi

fi

 cation

NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.  

This appliance is tested and approved as either supplemen-
tal room heat or as a decorative appliance.  It should not be 
factored as primary heat in residential heating calculations.

NOTICE: 

This installation must conform with local codes. 

In the absence of local codes you must comply with the 
National Fuel Gas Code, ANSI Z223.1-latest edition in 
the U.S.A. and the CAN/CGA B149 Installation Codes in 
Canada.

Product Speci

fi

 c Information 

 

This product is listed to ANSI standards for “Vented Gas 
Fireplace Heaters” and applicable sections of “Gas Burn-
ing Heating Appliances for Manufactured Homes and 
Recreational Vehicles”, and “Gas Fired Appliances for 
Use at High Altitudes”.

MODELS: 

CD4236-MOD, CD4842-MOD

LABORATORY: 

Underwriters Laboratories, Inc. (UL)

TYPE: 

Direct Vented Gas Fireplace

STANDARD:

 ANSI Z21.50-2014 • CSA 2.22-2014

Models

(U.S. or Canada)

Maximum

Input 

BTU/h

Minimum

Input 

BTU/h

Ori

fi

 ce

Size 

(DMS)

CD4236-MOD 

(NG)

US

(0-2000 FT)

28,000

19,000

40

CANADA

(2000-4500 FT)

25,200

17,100

41

CD4236-MOD 

(LP)

US

(0-2000 FT)

20,000

14,000

55

CANADA

(2000-4500 FT)

18,000

12,000

56

CD4842-MOD 

(NG)

US

(0-2000 FT)

32,000

22,000

35

CANADA

(2000-4500 FT)

28,800

19,800

36

CD4842-MOD 

(LP)

US

(0-2000 FT)

22,000

15,000

54

CANADA

(2000-4500 FT)

20,000

14,000

55

Installation and service of this 
appliance should be performed by 
quali

fi

 ed personnel. Hearth & Home 

Technologies  recommends HHT 
Factory Trained or NFI certified 
professionals.

Summary of Contents for CD4236-MOD




























Reviews: