This package includes (Style of push button and chime may vary from illustration):
• Wireless chime
• Wireless push button w/battery
• Hardware pack
You'll need to buy 2 “C” alkaline batteries for the chime. In typical use,
alkaline batteries will last up to one year.
Wireless Chime
3.
Install 2 alkaline “C”
batteries. Make sure
batteries are oriented
properly.
2.
Open chime case.
Press in catch on bot-
tom of chime and lift the
case open.
5.
Mount push button and chime.
Use either screws or double sided tape to mount
push button.
To mount with screws, remove back of case by
pushing in tab on bottom with a small screwdriver.
© 2007 HeathCo LLC
595-5551-10
Case Style “A”
Case Style “B”
4.
Test range. Temporarily position chime and
push button where you want them mounted.
Press push button to verify chime and push
button work properly. If chime does not sound,
see Troubleshooting.
12345678
1.
Install alkaline type A23 12 volt push button
battery. Remove back of case by pushing in tab
on bottom with a small screwdriver. Make sure
battery is oriented properly (see page 3).
