4
205967-01
Black to black
White to white
Recommended Grounding Method
Use a green ground “pigtail” (not provided) and twist
one end together with the bare fixture wire and the box
ground wire. Secure with a wire connector. Secure the
other end of the “pigtail” with the GND screw on the
mounting plate.
Connect the fixture wires to the wires in the junction box.
Twist the wires together and secure with wire connectors.
If you have a metal junction box, you may not need the green
“pigtail”. If you are unsure about the grounding method,
consult your local building code.
WIRING THE LIGHT FIXTURE
CAUTION: DO NOT connect the RED wire
unless you want to control other lights from the
motion sensor (see Optional Wiring).
Note:
All wiring must be run in accordance with the Na-
tional Electrical Code through conduit or another accept-
able means. Contact a qualified electrician if there is any
question as to the suitability of the system.
WARNING: Turn power off at circuit breaker
or fuse.
One Motion Light
Two Motion Lights
Black
White
Green
or Bare
Copper
Green
or Bare
Copper
Light
Fixture
Black
White
Light
Fixture
Light
Fixture
