background image

This chime requires 3 “C” alkaline batteries (not included). In typical use, 
alkaline batteries will last up to 2 

1

/

2

 years.

Wireless Chime

© 2017 HeathCo LLC 

Figure 1

 WARNING: To prevent possible 

SERIOUS INJURY or DEATH:

• NEVER allow small children near

batteries.

• If battery is swallowed, immediately

notify doctor.

This package includes (Style of door sensor and chime may vary from illustration):

1. Remove orange battery tab from push

button. Remove back of case by pushing in
tab on bottom with a small screwdriver (see
Figure 1). Remove orange battery tab.

2.  Install 3 alkaline “C” batteries (not includ-

ed) into chime base. Make sure batteries are
installed according to the diagram inside the
chime (see Figure 2).
IMPORTANT: To avoid resetting chime base 
memory, wait 30 seconds before pressing 
push button. See Troubleshooting, Problem 
3
 if chime memory was accidentally reset.

CHI

ME

 VO

LU

M

E

3x - “C” TYPE BATTERIES

TYPE 

“C”

TYPE 

“C”

TYPE 

“C”

PRESS & HOLD

TUNE–1 SEC SYNC–3 SEC RESET–10 SEC

Figure 2

Chime base

Chime cover

Wireless push 

button

Hardware 

pack

Model

CHI

ME

 VO

LU

M

E

3x - “C” TYPE BATTERIES

PRESS & HOLD

TUNE–1 SEC SYNC–3 SEC RESET–10 SEC

7611

7464

Summary of Contents for SL-7464-03






Reviews: