5
598-1136-00
DRAFT COPY
AM
PM
A
A
B
ON
OFF
ON
OFF
DIM
GROUP
MODE
ALL
ON
ALL
OFF
PANIC
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
ON
OFF
ON
OFF
DIM
DIM
–
Select
Time Set
Program
+
1
2
Programming Control Panel
Programming Indicator (LED)
Program Button
Group Selection
Button (A or B)
Channel (Includes
ON, OFF, DIM)
Mode Selection
Button (1 or 2)
All On
All Off
Panic Button
LED Indicators
Group Selection
Indicator (LED)
10. When the desired OFF time is displayed press the OFF button located by
the same channel number as above. The OFF time is now programmed (the
Group Indicator will Flash when the OFF time has been saved).
• To save additional ON/OFF programs for other switches within the same
group and the same MODE, repeat the above steps using a different channel
for each additional program.
• To save an additional ON/OFF program for the same channel within the same
group but a different MODE, press the PROGRAM button. The LED above
Mode 2 will light. Repeat above steps to program additional ON/OFF times.
• To save an additional ON/OFF program for the same channel but using Group
B, press the PROGRAM button until the PROGRAM LED turns off. Press the
Group B button. Repeat the above steps using a different MODE setting than
the first program to set the second ON/OFF program.
• To exit PROGRAM mode, press the PROGRAM button until the LED indicator
turns off.
Note: The 12/24 hour setting can not be changed while programming channels.
• To change any programmed channel to a new ON/OFF time, repeat the
above steps for the channel you wish to change.
• To erase a programmed channel so it is not activated when a programmed
mode is selected, set both the ON and OFF times to the same setting.
To activate the programmed channels, press the MODE button to display MODE
1, MODE 2, or both MODE LED’s depending on the programmed channels you
want activated. (See MODE button description.)
