2
598-1116-00
DRAFT COPY
Car Visor Clip
The remote control is equipped with a removable car visor clip for added
convenience. The car visor clip may be removed to allow the remote to lie flat on
table tops or other horizontal surfaces.
1. Attach car visor clip to car visor as shown in Figure 3.
2. To remove car visor clip.
Insert a small flat-head screw driver into slot on
back of remote. Gently push portion of clip inside of remote with screwdriver
while pulling clip out of remote from top (see Figure 4).
Figure 3
Figure 4
Car Visor
Remote
Control
Visor Clip
Screwdriver
