3
598-1303-01
❒
Align the light control cover plate and the junction
box holes. Secure with the mounting screws.
❒
If not installed on a weatherproof box or if an adaptor
plate (not included) was used,
caulk the wall plate
and mounting surface with silicone.
❒
Adjust the lamp holders by loosening the lock nuts
but do not rotate the lamp holders more than 180°
from the factory setting. When screwing in the flood-
lamps, do not overtighten.
Keep lamps at
least 1" (25 mm)
from the sensor.
Avoid water damage and
electrical shock - keep lamp
holders below horizontal.
Lock nuts
M
ount
the
L
ight
C
ontroL
To Deactivate the Flash Alert
❒
Remove the light fixture if necessary.
❒
Locate the (Blue) wire loop coming from the sensor
inside the canopy.
❒
Cut the (Blue) wire loop.
❒
Securely attach wire nuts (supplied) to each of the
cut ends of the (Blue) wire.
DO NOT connect the
wires together.
❒
Mount light control to wall or eave.
WARNING: Turn power off at circuit breaker
or fuse.
Bottom of Sensor
ON-TIME
10 5 1 TEST
MIN MAX
SENS
TEST AND ADJUSTMENT
NOTE: Sensor has a 1
1
/
2
minute warm up period
before it will detect motion. When first turned
on, wait 1
1
/
2
minutes.
❒
Turn on the circuit breaker and light switch.
❒
Turn the SENSITIVITY (SENS) control to the mid posi-
tion and the ON-TIME control to the TEST position.
Flash Alert - Deactivated
(Blue)
