Part A
Part B
Slide Part A into Part B - making sure the shorter plastic spacer
on A is in front and the small horizontal tube on B is also in front.
Then, slide Part D into the back of assembled frame (rotate 180
degrees if holes don’t align) followed by sliding part C into the
bottom of the frame. Make sure the shorter side of Part C is on
the same side as the plastic spacers as shown.
1
ASSEMBLY INSTRUCTIONS
2
Part D
Part C
Front
Longer Side
Shorter Side
3
Part K
Shorter
Side
Attach Part P, W, W, and AA hardware into the 3 locations as
shown. Then, insert AF, V, V, Z in front base.
Front Base Holes
Are Designed For a Tight Fit, You May Need a Ratchet to
Screw Bolt Through Frame, Then Secure Nut Tightly.
Add Part K leg tips to each of the 3 legs as shown.
To attach Foot Pedal to Frame, follow the image instructions
above. Tighten the Foot Pedal so it doesn’t move side to side
- but not too tight that it can’t move up and down freely. Make
sure Foot Pedal is attached as shown (Pedal foot traction should
be on the same side as the warning label).
Shorter Side
Longer Side
Part F
4
P
3x
W
3x
AA
3x
N
T
U
Y
W
3x
Pole
T
Foot
Pedal
To attach Release Handle to Frame, follow image instructions
above and tighten the Lock Nut to the Bolt securely so the
handle is tight when moving forward or backward. Make sure
handle is facing forward when attaching.
M
T
R
R
S
S
U
Y
Part E
R
Foot Traction
Pitch Hole
Decal
5
www.HeaterSports.com
800-492-9334
Spacers
Long Tube
Part K
Part K
AF
1x
V
1x
Z
1x
V
1x
Pole
Secure Hardware Very Tight!
1
2
3
1