Insert Top Legs (3x D) in to bottom of Tripod (B), making sure the push pins lock in place.
Next, insert Bottom Leg (3x E) in to bottom of Top Legs (D), also making sure push pins lock in place.
Lastly, insert Top Pole (C) into the top of Tripod (B), securing it tightly with Top Pole Hardware (F).
*For added stability on soft surfaces, position the Ground stakes (2x G) on the back legs to lock in place.
E
E
E
D
D
C
1:
Position Tripod so front of
Tripod is facing you.
Next, insert the Long
Bolt attached to machine
through the right side of
the Tripod and out the
other side.
2:
Slide the Machine Housing
(A) close to the Tripod,
making sure the Tripod
fits inside the
Pre-Assembled Housing
Clamp.
3:
Slide Flat Washer (1st)
and Lock Washer (2nd)
on to the Long Bolt, then
tighten the Knob on to
Long Bolt until machine
is placed in the desired
pitching position.
Front View
Front of Tripod
Back of Tripod
TRIPOD ASSEMBLY
HOUSING ASSEMBLY
B
4
www.HeaterSports.com
800-492-9334
D
F
*IMPORTANT:
Make Sure the Machine is Mounted so
the Ball Exits Over the Front Leg
When Pitching!
G
G
Side View
