HEAT1 ECO pro-line 2000W, Instructions Manual

Page: 6 / 28

6
Notice:
• Use 2 pieces AAA size 1.5V batteries in the remote control. Remove the battery when not use
for long time, thus the lifespan of remote control can be extended.
• Choose the same specification battery when replacing the battery inside, otherwise it may
cause remote control not work , thereby affect the normal use of the heater.
• Please contact service agent for further help if you need the function.
• The remote control function may be out of work if there is a barrier between the remote
control and heater .
• Replacing the batteries duly so as not to affect the normal use of heater and remote control.
I O II Switch function
• I = Standby Use the remote control to turn ON/OFF the heater.
• II = ON The heater works directly without remote control.
• O = OFF Power OFF.
Operation Instruction
• Remove all package material (including anti-vibration object of the lamp) and check the
• appliance, supply cord and the plug for signs of damage.
• Open the package of screw, take off the screws
• Open the package of the base ,take off the base
• Fix the base on the heater ,Figure 1
• Never move or cover it when the heater is working, Figure 2
• Pay attention to the mounting place and all mounting material(dowels, screws). Ensure they
are suitable and stable enough for mounting and lastingly holding of the appliance.
• Pay attention that, the installation of the appliance must not add excessive wind load.
• Plug in the power source and operate the remote control. Then observe, whether during the
first 10-15 minutes the appliance works trouble-free.
• If you do not use,please remove battery socket.
GB