GB
Specifications
Model:
LDHR018-150EKY
LDHR018-200EKY
Voltage (V):
220-240V
~
220-240V
~
Power consumption (W):
1500W
2000W
IP-class:
IP65
IP65
Remote
control:
Yes
Yes
Battery
type:
2xAAA
2xAAA
I O II Switch function
I = Standby
Use the remote control to turn ON/OFF the heater.
II = ON
The heater works directly without remote control.
O = OFF
Power OFF.
Remote control instructions
Button
Function
Feature
ON
Turn ON
1. Turn ON the heater.
2. Receiver light in heater will turn red with 100% power
output
OFF
Turn OFF
1. Turn OFF the heater.
2. The receiver light will flash in red color if the heater
connects to the power supply there will be no
indication after cutting off the electricity.
Operation instruction
•
Remove all package material (including anti-vibration object of the lamp) and check the appliance,
supply cord and the plug for signs of damage.
•
Pay attention to the mounting place and all mounting material (dowels and screws). Ensure they are
suitable and stable enough for mounting and lastingly holding of the appliance.
•
Before mounting, the minimum safe mounting distances and tilt angles shown in the figures must be
strictly followed.
•
The distance between the bottom edge of the appliance and the floor must be at least 1.8 m. See
figure 2.
•
There must be a distance of at least 0.25 m between the appliance and the ceilings, roofs or other
covers. See figure 2.
•
There must be a distance of at least 0.5 m at each side between the appliance and walls or the like.
See figure 2.
•
Recommended degree to mounting surface is 45°. See figure 3.
•
Pay attention that the installation of the appliance must not add excessive wind load.
•
First fix the mounting bracket on the wall. Ensure that the place to be installed is secure and firm if not
install the appliance to a stand.
•
Adjust the desired angle of radiation and tighten all screws. Check regularly the screw’s connection.
Mechanical bearing pressure and oscillation due to wind or rain could lead to loose.
•
Plug in the power source and operate the remote control. Then observe, whether during the first 10-
15 minutes the appliance works trouble-free.
•
If you do not use, please remove battery socket from the remote control.
4 5
Summary of Contents for ECO plus-line LDHR018-150EKY
