5.
When connected properly to your WiFi, both blue LED lights on the range extender should be
lit up. If there is only one solid blue LED, or a blue and red LED lit, return to the TP-Link quick
setup guide and try again.
6.
If the range extender has two solid blue LED lights on, unplug it and then plug it into the back
of the Cloud Heater CH1.
a.
There are two connectors that need to be connected: power plug and ethernet
plug. Be sure to connect both.
b.
On the bench style Cloud Heater, the range extender goes inside the bench and on the
back of the metal Cloud Heater core.
c.
On the cabinet style Cloud Heater, the range extender connects to the back, just below
the air filter and power cord connection.
7.
Plug the Cloud Heater CH1 power cord into a suitable power outlet (see electrical guidance
and warnings, below)
8.
Turn the Cloud Heater “On” by twisting the thermostat to 80 degrees.
9. Check that the range extender turns on. Wait 30 seconds to verify it has connected properly
to the WiFi Network – there will be two solid LED lights lit on the range extender when the
extender is connected successfully.
10.
(Work in progress…skip for now )
Use your phone camera to scan the following QR code or go to the following web site:
https://www.heatwithbenefits/login.html
Create or log in to your Heat with Benefits account. Once logged in, you can check the status of
your heater, check your benefits balance, manage your benefits payment plan, and update your
account information.
Placement Guidance and Warnings:
IMPORTANT: A Cloud Heater CH1 device is heavy (almost 40lbs) and should only be moved, lifted, or
carried by two or more people after reading all of this document.
-- For INDOOR USE ONLY. Do not operate a Cloud Heater CH1 outdoors.
-- Cloud Heater CH1 devices are not intended for use in possibly wet indoor room such as bathrooms,
kitchens, and laundry areas. Never locate a Cloud Heater CH1 where it may fall into water or operate
one in a wet area.
-- Do not plug in or operate a Cloud Heater CH1 in areas where paint, gasoline, or other flammable
liquids are used or stored, such as a garage or workshop. Do not plug in or operate a Cloud Heater CH1
where it may be exposed to flammable or explosive vapors.
-- Place the air intake/filter side of your Cloud Heater CH1 at least 0.3m (10 inches) from wall and do not
block intake/filter.
