Heat Storm HS-1500-TRC, User Manual And Safety Instructions

Page: 8 / 18

5
Installation
PRECAUTION:
• Installation should always be carried
out by a qualified electrician or a com-
petent person.
• The energy supply must be done
through a properly grounded socket.
• The heaters should always be in-
stalled horizontally and should always
only use the mounting brackets or
chains provided.
• The heater should not be facing the
ceiling or inflammable substances.
• The heater must be installed so as
to prevent that the switches can be
touched from those who are in the
shower.
• Do not use the heater directly near a
bathtub, a shower a swimming pool.
• Ensure that there is no possibility
of inflammable material coming into
contact with the heater, or lies near
the heater.
• Heaters should not be installed in
areas where hazardous vapors may
be present. Defined in BS5345.
• The heaters are fitted with safety
guards. These are intended only to
stop large objects from hitting the
emitters. On no account should the
heater be operated with the guard
removed.
WALL MOUNTING
ONLY USE SUPPLIED BRACKETS.
1. Ensure the power cable does not touch the reflector of the heater or hangs into the
heated area.
2. Ensure the power cable can reach an indoor socket. Do not twist or bend the power
cable.
3. This heater is IPX4 protection, and can be used indoors or outdoors. If using out-
doors and you need an extend socket, the cable and the socket system must be
waterproof.