6
Installation Instructions
Installation Instructions
•
It is highly recommended to seek help from another person when installing
this heater .
•
Remove all package material (including any anti‐vibration foam surrounding
the lamp)
•
Check the appliance, supply cord and the plug for signs of damage .
1 . Ensure the mounting pole and all mounting parts (mounting pole, mounting
clamp etc) are suitable and stable enough to provide lasting support to the
heater . The mounting pole should be 30-50mm in diameter (Fig 2 .)
2 . Before mounting, the minimum safe mounting distances and tilt angles
shown in the figures must be strictly followed:
•
The distance between the bottom edge of the appliance and the floor
must be at least 1 .8m .
• There must be a distance of at least 0 .25m between the appliance and the
ceilings, roofs or other covers .
• There must be a distance of at least 0 .5 M at each side between the
appliance and walls, fabric or the like .
• Ensure the parasol heater is not mounted in a position which is not
susceptible excessive wind load .
3 . Remove the Clamp Section from the heater assembly by sliding it vertically
upwards out of the grooved sections .
4 .
Attach the heater by aligning the fixing pole inside the cavity created by
removing the Clamp Section .
5 . Ensure the ON/OFF switch controls are facing downwards .
6 . Slide the Clamp Section vertically back into the grooves and tighten the
Fastening Clamp to secure the heater .
7 . Adjust the desired angle of heaters . Regularly check the fastening clamp is
tight . Vibration from the wind or rain can lead to loosening of the attachment .
8 . Disconnect from the power supply when the heater is not in use .
Summary of Contents for 901199C
Page 11: ...11 Customer Service...
