1.
Press the ‘Temp mode preset button’ (17). You will now see the
screen to the right.
2.
Its now possible to change to each mode setting and adjust the
preset temperature for each of the 5 modes.
3.
After setting each one to your desired temperature, press Apply to
save your settings.
1.
Press the ‘Temp protection’ button (19). You will now see the
screen to the right.
2.
You are now able to see the current settings and also adjust your set
points.
3.
After setting the upper and lower limits, press Apply to save your
settings.
Notes on protection settings-:
High Protection
uses external sensor probe for floor temp. When floor temp exceeds set high protection temp, the
system will be shut off automatically.
Low Protection
functions only when thermostat is in OFF mode. It uses internal sensor to detect the room temp.
When room temp goes below set Low protection temp, the system will be turned on automatically until the
minimum temperature is reached.
1.
Press the ‘language selection’ button (18). You will now see the
screen to the right.
2.
You are now able to select the language you require, then press
Apply to save your settings.
Temperature Mode Pre-set
High & Low Protection Settings
Language Selection
