HD5i
WOOD BURNER
INSERT STOVE
Please fix label with serial number and stove
type here before putting manual into stove
Installation and Operating
Instructions
Please hand these instructions to the stove user when the installation is complete. Leave the stove ready for
operation and instruct the user in the correct use of the appliance and operation of controls.
Important: –
This product must be installed by a suitably qualified installer.
Heat Design Ltd.
30-60 Hawthorn Road
Western Industrial Estate,
Naas Road,
Dublin 12
PLEASE READ ALL THESE INSTRUCTIONS CAREFULLY!
For safety reasons it is essential that your stove is correctly installed and operated. Heat Design
cannot accept responsibility for any fault or consequential problems arising through incorrect
installation or operation.
The HD5i stove has been exempted under the clean air act of 1993 as suitable for use in smoke control areas when
burning seasoned wood logs. The stove contains a factory fitted secondary air stop which ensures that the
secondary air is permanently open 4mm minimum. Please carefully read the instructions on wood burning contained
in this manual, these MUST be adhered to at all times. Please see page 15 of the manual for further reference to the
clean air act of 1993
