Heat Controller RAH-183G, Owner'S Manual

Page: 10 / 20

Owner’s Manual Room Air Heat Pump with R-410A Heat Controller, Inc.
8
Installation Instructions
WINDOW REQUIREMENTS
●
These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
●
The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
●
All supporting parts must be secured
to firm wood, masonry or metal.
●
The electrical outlet must be within
reach of the power cord.
1
１７
３
／
８
＂ min.
30" to 38.1"
(With accordion panels)
26" min.
(Without accordion panels)
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES-
WIDTH: 2"
LENGTH:
Long enough to fit inside the
window frame.
THICKNESS :
To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than frame
Storm
window
frame
Wood
Stool
2
REMOVE THE AIR CONDITIONER
FROM THE CASE
Remove the locking screw and locking
bracket from the lower frame. Save to
reinstall later.
Remove the ground screw and save to
reinstall later.
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
B
A
3
PREPARE THE WINDOW
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
4
Remove the ground screw
and save to reinstall later
8
C
26” min.
(Without accordion panels)
unit
Remove the locking screw and lock-
ing bracket from the lower frame.
Save to reinstall later.
Remove the ground screw. Save to
reinstall later.