9
Heat & Glo • SL-5/5LP-IFT, SL-7/7LP-IFT, SL-9/9LP-IFT Owner’s Manual • 2632-981 Rev. D • 1/21
Figure 3.4 Good Faith TV Guidelines
Item Minimum Dimensions
A
2.5 inches
B
2 inches minimum to 3 inches
maximum
C
18 inches
D
Wall Brkt + TV Thi 2.5
inches
B
B
A
Appliance
TV
Mantel
A
C
Notes:
1. These are good faith recommended clearances only and not a guarantee of compliance with all TV
manufacturers’ maximum all
owable operating
temperatures.
2. Since every home has unique ai
r flow characteristics and maximum allowable operating temperatures
can vary from manufacturer to manufacturer and from model to model, actual TV temperatures should
be validated at
the time of each installation. TVs should not be used in situations where the actual TV
temperature exceeds the manufacturers’ maximum allowable
operating temperatures identified in the
TV’s technical
specifications. Contact the TV’s manufacturer directly if you cannot locate this
information or have questions regarding the information.
3. Mantel height and depth must conform to mantle requirements
specified in the appliance installation
manual.
4.
“C” dimension taken from the top of the hood or appliance opening.
5.
Suggestions on how to further reduce TV temperatures:
a. Increase “A” dimension.
b. Increase “C” dimension, however, increasing “B” dimension beyond maximum recommended
typically results in higher temperatures.
TV Wall
Bracket
D
Appliance
C
TV on the wall
TV recessed into the wall
Good Faith Guidelines for TV Installations Above Appliance
